Sony Handycam HDR-CX250 Mode D'emploi page 62

A/V
connecting
cable
Input
Red
Signal flow
HDR-CX250/CX260V/CX580V/PJ260/PJ260V/
*
PJ580/PJ580V
HDR-PJ600/PJ600V/XR260V
**
Connect your camcorder to the input jacks

of the recording device.
3
Start playback on your
camcorder, and record it on the
recording device.
US

A/V Remote
Connector
*
A/V Remote
Connector
**
White Yellow
4
When dubbing is finished, stop
the recording device, and then
your camcorder.
Notes
You cannot copy images to recorders connected

with an HDMI cable.
Since copying is performed via analog data

transfer, the image quality may deteriorate.
High definition image quality (HD) movies

will be copied with standard definition image
quality (STD).
When you connect a monaural device, connect

the yellow plug of the A/V connecting cable
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.

Copying date and time information: [Data

Code] (p. 69)
Using 4:3 screen size display device: [TV Type]

(p. 69)