Function Buttons; View Settings; Ptz Interface - urmet domus 1093/061S Guide Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4.4.5

FUNCTION BUTTONS

ICON
Starts/stops live LIVE connection to all available DVR channels at the same time according to the chosen
The file name will be of the following type: Picture_192.168.36.40_05_20071113_094244_6227453 where
192.168.36.40 → IP address of the device
-
-
05
-
20071113
-
094244
-
6227453
Press once (the icon will change to
4.4.6

VIEW SETTINGS

ICON
This is used to adjust the volume during playback if audio is available and if "VIDEO & AUDIO" stream is
4.4.7

PTZ INTERFACE

ICON
/
DS1093-022
viewing mode. The "Main Stream" will be used by all channels for connection.
This allows to acquire a snapshot of the selected LIVE video channel (red box).
The acquired image may be saved by default in the C:\picture\ folder in bitmap format.
→ video channel
→ date in year/month/day format
→ time in hour/minute/seconds format
→ ID
The acquired sequence is saved by default in the folder C:\ mpeg4record
This setting is used to adjust the brightness of the picture. Drag the cursor to set.
This setting is used to adjust the contrast of the picture. Drag the cursor to set.
This setting is used to adjust the hue of the picture. Drag the cursor to set.
This setting is used to adjust the colour of the picture. Drag the cursor to set.
This is used to position the connected dome camera. The central button "↻" is not used.
This is used to recall a previously stored presetting.
Enter the preset number to be recalled and click on ►.
This is used to adjust the zoom of the connected dome camera.
This is used to adjust the focus of the connected dome camera.
This is used to adjust the iris opening/closing of the connected dome camera.
DESCRIPTION
) to start recording the selected LIVE video channel (red box) on the
PC. Press again to stop.
Not enabled.
Restores default settings
DESCRIPTION
set in system configuration menu.
Drag the cursor to set.
DESCRIPTION
Not used
Press "+" and "-" to adjust.
Press "+" and "-" to adjust.
Press "+" and "-" to adjust.
53

Publicité

Table des Matières
loading

Table des Matières