Screen Saver; Video Standard; Enable Scaler; Brightness - urmet domus 1093/061S Guide Rapide

IMPORTANT NOTE
•
THE DEFAULT PASSWORD IS "12345".
•
It is advisable to change the default password to prevent intrusions.
•
To enter/edit the password, remember to press "SHIFT" (make sure that the STATUS LED lights up) followed
by the number keys. At the end of the operation, press "SHIFT" to go back to default functions. The STATUS
LED will go out.
•
Do not lose or forget the programmed password.
•
Take note of the new password and keep it in a safe place.
•
It will not be possible to access the device in local mode (i.e. using the front panel) if an alphanumeric
password is chosen (using the dedicated software).
2.1.1.4

Screen saver

This option can be used to set the OSD (On Screen Display) display time.
Use "▲▼" to select.
Possible selections: "1min", "2min", "5min", "10 min", "20 min", "30 min" and "never" (OSD is always shown – press "ESC" to
quit the menu).
2.1.1.5

Video standard

This option can be used to select the video format. Use "▲▼" to select. Possible selections are "NTSC" and "PAL".
2.1.1.6

Enable scaler

Function currently not available.
2.1.1.7

Brightness

This option can be used to vary the OSD menu brightness. Use "▲▼" to select.
2.1.1.8

Menu trasparency

This option can be used to vary the OSD menu transparency level.
Use "▲▼" to select. Possible selections: "1:1", "3:1", "1:3"and "No Trans".
3:1 indicates that the OSD prevails (by approximately three times) over the previous display; 1:3 indicates the opposite.
2.1.1.9

Date / time

This option is used to set the current date in day/month/year format and to set the current time in hour/minute/second format.
Press "◄►" to select the day, month, year and hours, minutes, seconds.
Use the number keys 0÷9 on the front panel to enter the date.
This option is used to automatically set time changes (to and from summer saving time).
When the "ORA LEGALE" is on, the clock will be automatically set back by one hour when winter time comes into effect, while it
will be automatically set forward by one hour when summer saving time comes into effect.
Press "ENTER" to access the submenu. Symbol " " in the check box indicates that the setting is enabled; symbol "×" indicates
that it is not.
Press "◄►" to go from one submenu option to another and press "▲▼" to set. Select "CONFIRM" and press "ENTER" to make
the changes effective.
After confirming the setting, in live and play modes, letter "E" or "I" will appear by the side of the date/time indicating summer
(when summer saving time is applied) or winter (when it is not) as shown below:
2.1.1.10

Preview

This menu is used to set camera display mode after the device is switched on, i.e. in LIVE mode (display, switching time, audio
presence and channel arrangement).
Position the "Active Frame" on the "Preview" icon and press "ENTER"
DS1093-022
Figure 24: date/time menu
36