Safety Precautions - OHAUS TAJ Manuel D'instructions

TAJ Carat / Gold Balances
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the TAJ
Carat and Gold Balances. Please read the manual completely before using the balance.

1.1 Safety Precautions

Please follow these safety precautions:
•
Verify that the Power Adapter input voltage matches the local power supply voltage.
•
Use the balance only in dry locations.
•
Do not operate the balance in hostile environments.
•
Do not drop loads on the pan.
•
Do not place the balance upside down on the pan.
•
Service should be performed only by authorized personnel.
1.2. Controls
Key Name
On-Zero
Off
Yes
Print
Cal
Figure 1-1. Controls.
TABLE 1-1. CONTROL FUNCTIONS.
Function
• Primary function (Short Press) – If balance is Off, turn
On. If balance is on, perform Zero/Tare function
• Secondary function (Long Press) – Turn balance Off.
• Menu function – (Yes) This key is used to accept the
currently displayed setting
• Primary function (Short Press) – Send the current display
value to serial port if installed
• Secondary function (Long Press) – Starts Span
calibration as available in Menu
EN-1