Photo Setting - Midland Street Guardian GPS+ Mode D'emploi

GMT setup: set your time zone.
•
If GPS Auto Update time is set, you need to select the right time zone to have correct
time set.
• TV Mode: NTSC / PAL.
Select the preferred TV mode
• Frequency: 50Hz / 60Hz.
Select the power supply frequency.
• Volume: High / Medium / Low.
Set the volume of playback audio and alarm beep.
• Exposure: +2.0 / +1.7 / +1.3 / +1.0 / +0.7 / +0.3 / 0.0 / -0.3 / -0.7 / -1.0 / -1.3 / -1.7 /
-2.0. If light source is lower or higher, you can increase or decrease the exposure value to
improve the image clearness.
• White Balance: Auto / Daylight / Cloudy / Tungsten / Fluorescent.
Images look differently under different light situations, this function supports choices of
reasonable light source to improve image quality.
• Default setting: Select OK to reset to default parameters.
• Time Lapse: Off / 1 second / 5 seconds / 10 seconds
The unit records a video taking a frame each set time interval. In this way the time in the
video passes faster.
• Version: shows info about the firmware version

Photo setting

Press the MODE button to switch to photo mode, you will see a camera icon shown on the
top left corner of the LCD.
While in video mode, press the MENU button to enter the video option o photo.
The following settings are available:
• Resolution
• Capture Mode
Sequence
•
• Quality
Use the UP/DOWN controls to browse the setting options, press REC to enter the setting,
select the desired option with UP/DOWN and confirm with the REC button.
• Resolution: 12M / 10M / 8M / 5M / 3M / 2M / VGA / 1.3M
Capture Mode: Single / 2S Timer / 5S Timer / 10S Timer.
•
When you press REC to take a photo, the photo will be taken after the selected interval is
passed.
Sequence: Off / On.
•
The camera will shoot 3 pictures quickly.
• Quality: Fine / Normal / Economy
Sharpness: Strong / Normal / Soft
•
• Color: Normal / Black&White / Sepia
• Quick Review: Off / 2 seconds / 5 seconds.
• Sharpness
• Color
Quick Review
•
13