Menu Settings; Video Settings - Midland Street Guardian GPS+ Mode D'emploi

Menu settings

Video settings

While in video mode, press the MENU button to enter the video option(the camera icon on
the top left corner is selected).
The following settings options are available:
• Resolution
• Loop Recording
• HDR
• Motion Detection
• Power ON record
Power OFF delay
•
Power ON delay
•
• Record Audio
• G Sensor set
Use the UP/DOWN controls to browse the setting options, press REC to enter the setting,
select the desired option with UP/DOWN and confirm with the REC button.
Attention: during the video recording it is not allowed to enter the MENU; first stop recording.
Resolution: 1920*1080 30P / 1280*720P 30P / 848*480 30P / 640*480 30P
•
• Loop Recording: Off / 1minute / 2minutes / 5minutes / 10minutes / 15minutes / 20minu-
tes When this mode is OFF, the camera stops recording when the micro SD card is full. If
this function is enabled, the car camcorder continues recording deleting the older videos.
The videos protected by overwriting won't be deleted.
• HDR (High Dynamic Range): Off / On.
HDR is a technique able to reproduce a greater range of luminosity, it makes your videos
brighter and the colors more intense. HDR improves the contrast while shooting a video
and is very useful in poor light conditions, for example if a person is located in a dim place
or if you are shooting a landscape.
• Motion detection: Off / On
With the motion detection feature the camera automatically starts recording everytime
a movement is picked up: either a person or an object; and will stop recording as soon the
motion stops.
This function needs the camera to be continuously power supplied.
Before activating or enabling it, you have to select "Auto Power off" OFF (Automatic
switching off).
Important: the motion detection picks up evident movements and not the little ones; therefore
this may cause a chopped recording because little motions are not detected.
• Power ON record: Off / On.
If ON the unit will automatically start recording when it is power supplied.
Power OFF delay: Off / 10seconds / 20seconds / 30seconds.
•
If set, the unit will wait the set value before turning OFF when the car is turned off.
Power ON delay: Off / 10seconds / 20seconds / 30seconds.
•
11