Getting Started; Inserting The Memory Card; Installing In Vehicles; Mount To Windshield - Midland Street Guardian GPS+ Mode D'emploi

Getting Started

Inserting the Memory Card

Insert the memory card with the gold contacts facing the back of the camcorder. Push the
memory card until it clicks into place.
To remove the memory card: push to eject the memory card out of the slot.
Note:
• Do not remove or insert the memory card when the device is powered on. This may damage
the memory card.
• Use class 10 micro SD cards for this camcorder.
• It is recommended to format the micro SD cards before the initial use.

Installing in Vehicles

Mount to Windshield

1. Attach the bracket to the device. Slide it into the bracket holder until you hear a click.
With the suction-cup laying flat, position the suction-cup on the windshield.
2. Fix the DVR nearby the rear view mirror by the supplied bracket, without blocking the
line of sight.
3. Connect the bracket and DVR, hide the cable into the car ceiling.
4. When the cable reaches the top corner of the car door, insert the cable into the split as
shown in the picture (A).
5. Open the sealing strip on the edge of the car door, insert the cable along the strip (B).
Plug in the cigarette lighter as shown in the picture (C).
(B)
(C)
7
(A)