Setting The Mowing Height; Replacing The Mowing Blades - Greencut GLM680SX Manuel D'utilisation

SETTING THE MOWING HEIGHT

The mowing height is set centrally using the central mowing height adjustment lever (Fig. 1 – point
10).
You can select from 7 positions in the range of 25 to 75 mm. The middle mowing height is the most
suitable for the majority of lawns.
Lawn damage may result when the lowest height is set.

REPLACING THE MOWING BLADES

CAUTION!
For this task, we recommend that you contact an authorized service Centre.
CAUTION!
Prior to removing the blade, drain the oil from the oil tank.
If you wish to replace the mowing blade, remove the bolt (Fig. 10). Perform the
installation according to the provided picture. Tighten the screw. The tightening
torque is 40 Nm. When replacing the blade, replace the fastening bolt also.
57
EN