LOFT
54F 01 00x
4. Assembling the babybed
Step 1 : Use both end sides P1 and P2, the feet U and V and eight bolts W.
Place the feet (U and V) on the holes of the end sides. Push two bolts (W) into the drillings of each leg and
tighten them in the nuts on the end sides.
Step 2 : Use both sides with bars P3 and four cylindrical nuts C.
Push two cylindrical nuts (C) into the provided drillings at the top and bottom on the ends of both sides with
bars (P3).
Kinderbed 120x60 cm
Kinderbett 120x60 cm
Lit bébé 120x60 cm
Baby cot 120x60 cm
Quax
Quax
®
®
First dreams
First dreams
First steps
First steps
23