Installation; Inserting Batteries Into The Remote Control; Connecting The Aerial And Vcr - Sony WIDE KP-44PS2 Mode D'emploi

Installation

Inserting Batteries into the Remote Control

Make sure you insert the batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.

Connecting the Aerial and VCR

Connecting cables are not supplied.
The Scart lead is optional.
If you use this optional connection it can improve picture and sound quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the projection TV refer to the "Manually Tuning the TV"
section of this instruction manual, to tune in the set to the output of your VCR. Also refer to your VCR instruction manual
to find out how to find the output channel of your VCR.
or
OUT
GB
IN
VCR
7
Installation