Parts And Features - Hamilton Beach Eclectrics Guide De L'utilisateur

840141600 ENv01.qxd

Parts and Features

1. Food Slots with Guides
2. Bread Lifter – Push down bread
3. Shade Selector – The shade selec-
tor ranges from light to dark. Adjust
to desired setting before using.
Medium
Med.
Light
Light
4. Programming Buttons
ON•Cancel – This light will illumi-
nate when the toaster is on. To
cancel or end a cycle, press the
On/Cancel button. The cycle will
stop and the light will go out.
Bagel – Use to toast only one side
of a cut bagel. Load toaster with
cut side of the bagel facing out, as
the center heating element is
turned off during this cycle. To use:
press the Bagel button after the
toast cycle has started.
6
3/31/06 2:06 PM Page 6
lifter to start
toaster. The
bread lifter may
be lifted up to
stop toasting
during a cycle.
Med.
Dark
Dark
5. Slide-Out Crumb Tray (located on
Defrost – Use only on frozen
foods that were made to be
placed in a toaster. This feature
allows additional time for the food
to thaw and heat through. To use:
press the Defrost button after the
toast cycle has started.
Reheat – Use to warm food that
has cooled. This function starts a
short 30 to 50 second toast cycle.
The Shade Selector setting does
not affect the Reheat time. To use:
press the Reheat button after the
toast cycle has started.
To combine programs is easy.
For example, to toast a frozen
bagel:
• Load bagel in toaster with cut
sides facing out.
• Choose desired Shade Selector
setting.
• Push down the Bread Lifter to
start the toasting cycle.
• Press Bagel button, then press
Defrost.
back of toaster – see page 8 for
more information).
Bagel
·
ON Cancel
Programming Buttons
and Shade Selector
Defrost
Reheat