Knob Setting; Meter Knob Setting; Time Knob Setting - koban KDP7 Mode D'emploi

Knob setting

METER - TIME - LUX knob (See FIG.11).
To set ambient
light level
To set desired
detection range

METER knob setting

• Set Meter knob value at the position of "-", the smallest "field of view"
will be performed.
• Set Meter knob value at the position of "+", the largest "field of view"
will be performed.
• To adjust the Meter knob according to user's desires in between the
position of "+" & "-".

TIME knob setting

• Set TIME knob value at the position of " - ", the minimum delay time will
be approx 6sec.
• Set TIME knob value at the position of " + ", the maximum delay time will
be approx 12min.
• To adjust the TIME knob according to user's desires in between the
position of "+" & " - ".
www.grupotemper.com
Motion detector light control
METER LUX TIME
FIG.11
KDP7
Auto shut-off
timer control
Instructions manual | 41