Important Safety Instructions; For Best Performance; Other Important Information - Panasonic VL-FKD2EX Guide De Démarrage

Important safety instructions

When using your product, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, and injury to persons, including
the following:
1. Do not use this product near water for
example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement or near
a swimming pool.
2. Use only the AC adaptor indicated in this
manual.
SAVE THESE INSTRUCTIONS

For best performance

Location/avoiding noise
The repeater and other compatible Panasonic
units use radio waves to communicate with each
other. (The product operates in the frequency
range of 1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW (max.).)
R Install the repeater within the main monitor
range of the Video Intercom System in an
indoor environment. We recommend installing
the repeater in a raised position (such as on a
wall).
R For maximum coverage (approx. 100 m) and
noise-free communications, install your repeater:
– at a convenient, high, and central location
with no obstructions between the sub monitor
(or camera) and repeater in an indoor
environment.
– away from electronic appliances such as TVs,
radios, personal computers, wireless devices,
or digital cordless phones.
– facing away from radio frequency
transmitters, such as external antennas of
mobile phone stations. (Avoid installing the
repeater near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
R If the reception for a repeater location is not
satisfactory, move the repeater to another
location for better reception.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent lamps
and motors.
R The product should not be exposed to direct
sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a long
period of time, unplug the product from the
power outlet.
R The product should be kept away from heat
sources such as radiators, cookers, etc. It
should not be placed in rooms where the
temperature is less than 0 °C or greater than
40 °C. Damp basements should also be
avoided.
R Do not install the product in locations that are
suspect to sudden changes in temperature.
Failure to do so may cause condensation to
form on the product causing malfunction.
R Even when the repeater and sub monitor (or
camera) are used within 100 m of each other,
obstructions can cause weak signals, noise,
interrupted transmissions, distorted images and
slow image refresh rates. Obstructions can
include:
– Metal doors or metal shutters.
– Heat insulation including aluminium foil.
– Concrete walls or walls made of galvanized
iron sheet.
– If the sub monitor is being used in a different
building, or a different part of the house, i.e. a
different floor to the where the main monitor
has been installed.
– Many walls.
– Double insulated glass windows.
R Operating the product near electrical appliances
may cause interference. Move away from the
electrical appliances.

Other important information

R The AC adaptor is used as the main disconnect
device. Ensure that the power outlet is installed
near the product and is easily accessible.
Information for Users on Collection and
Disposal of Old Equipment and used Batteries
A B C
5