GINGKO GK16G12 Mode D'emploi page 3

DISPLAY SCREEN INTRODUCTION:
Year Display
Date Display
On Screen Beep Alarm Display
YEAR, DATE & TIME SETTING INSTRUCTIONS
The clock will take you through all of these settings in this order and it won't allow you to
skip these settings.
NOTE: If you do not select anything for more than 20 seconds the clock will exit the setting
mode and return back to the regular display.
Press & hold down SET for 3-5 seconds to access the setting mode

When the YEAR flashes press + or - to change the YEAR and then press SET to confirm.

When MONTH flashes press + or - to change the MONTH and then press SET to confirm.

When the DAY flashes press + or - to change the DAY and then press SET to confirm

When the HOUR flashes press + or - to change the HOUR and then press SET to confirm

When the MINUTE flashes press + or - to change the MINUTE and then press SET to

confirm to the 24/12 hour clock setting
At last, the clock will give you an option to choose from 24H or 12H. To choose a

time format press + or - to select between the two options and then press SET
to confirm and the clock will save all your setting and exit setting mode.
Temperature Display
Sound function ON
On Screen Radio Frequency Display
Time Display
Sound function OFF
On Screen Radio Alarm display