ThermoPro TP-63A Manuel D'instructions page 5

2. Rain-proof and wall-mount
EN 3. Outdoor Temperature range: -31 ~158°F(-35 ~70°C).
4. Humidity range: 10% ~ 99%.
5. Adapter input：AC100-240V 50/60Hz;
Adapter output：DC5.0V 300mA.
Buttons
To access CHANNEL SELECTOR and RESET buttons, you
need to unscrew the cover as per Fig.
design.
°F °C
-8-
CHANNEL Selector (1,2,3): Slide to set Channel 1,2 or 3.
RESET: Press once to reset the remote sensor.
: Press and hold for 2 seconds to turn ON/OFF the unit.
(ON: Flash 1 time, OFF: Flash 3 times)
Synchronize Remote Sensors with The Base
Station
1. Bring the remote sensor near the base station;
2. Once the batteries are installed into the base station, the
RF indicator will flash for 3 minutes, indicating that
the base station is in synchronization mode and is waiting
for remote sensors to be registered.
3. Set the CHANNEL selector on the back of the remote
sensor unit to position 1 or 2 or 3. The unit is preset on
-9-
EN