General Safety - Campbell Hausfeld XT200000 Instructions D'utilisation

SAFETY INSTRUCTIONS (CONTINUED)
This manual contains important safety, operational and maintenance
information. If you have any questions, please visit
www.campbellhausfeld.com for customer assistance.
California Proposition 65
to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
Illinois Lead Poisoning Prevention Act

General Safety

This product is part of a high pressure system and the following safety
precautions must be followed at all times along with any other existing safety
rules.
1.
MANUAL
2.
result in death or serious personal injury.
3.
4.
5.
6.
7.
Read all manuals included with this product carefully. Be thoroughly
familiar with the controls and the proper use of the equipment.
Only persons well acquainted with these rules of safe operation should
be allowed to use the air tool.
Do not exceed any pressure rating of any component in the system.
Maximum operating pressure of 90 PSI is measured at the tool inlet
while the tool is running. The pressure drop between the compressor
and tool needs to be compensated for at the compressor.
Disconnect the air tool from air supply before changing tools or
attachments, servicing and during non-operation.
Do not wear loose fitting clothing, scarves, or neck ties. Loose clothing
may become caught in moving parts and result in serious personal injury.
Do not wear jewelry when operating any tool. Jewelry may become
caught in moving parts and result in serious personal injury.
Do not depress trigger when connecting the air supply hose.
This product can expose you to chemicals including
lead, which are known to the State of California
Contains lead. May be harmful if eaten or chewed.
Complies with Federal Standards.
Do not exceed the maximum operating pressure of
the air tool (90 PSI). The air tool could explode and
Safety glasses and ear protection must be worn
during operation.
Disconnect air tool from air supply before changing
attachments or serious injury could occur.
Make sure cut-off wheel is tightened securely before
operating air tool.
6