Remington REVEAL MPT4000C Mode D'emploi page 4

ENGLISH
• Ensure the product is switched off.
• Hold the upper part of the trimmer and gently slide the
lower part off.
• Insert 1 alkaline 'AAA' battery positive end down.
• Slide the bottom part back onto the unit, ensuring the
notch slides over the On/Off switch.
, Inserting Batteries: Tweezers
• Your tweezers come with 3 x cell batteries (included).
, To Change the Batteries:
• Unscrew the battery compartment (anticlockwise) (fig. 1).
• Remove the old batteries from the battery
compartment.
• Replace with new batteries with the positive end facing
up (fig. 2).
• Screw the battery compartment back together
(clockwise) (fig. 3).
Fig. 1
F INSTRUCTIONS FOR USE
, The beauty trimmer gently removes unwanted hair and
is ideal for use on the face, neckline, nose, ears and
other small areas.
, The small trimmer and eyebrow comb are also ideal for
shaping and styling the eyebrows.
• Turn the trimmer on by using the on/off switch.
• Push the switch up to the first groove to turn the
trimmer on.
• Push the switch up to the second groove to turn the
trimmer and detail light on.
, To Trim Unwanted Hair
• Use the larger trimmer.
• Hold the trimmer against the skin and apply gentle
pressure.
• Trim against the direction of hair growth.
, To Trim the Length of Eyebrows
• The detail trimmer has an eyebrow comb that has two
length options.
• Choose length setting; LONG or SHORT (we recommend
starting with long).
• Ensure the trimmer is OFF and slide the comb over the
trimmer blades.
4
Fig. 2
Fig. 3