Laser Maintenance; References - Molecular Devices Axon GenePix 4300A Mode D'emploi

References

0112-0177 B

Laser Maintenance

Maintenance and servicing of the laser shall be done by trained
personnel only. Any person who services laser equipment must be
aware of the potential hazards associated with the equipment. When
servicing any laser device, follow these guidelines carefully:
• Post warning signs at entrances and at prominent locations near
the laser work area if service to the embedded laser is in
progress.
• Limit access to the instrument to trained personnel.
• When servicing the laser, wear safety goggles appropriate for
use at the emitted wavelength.
WARNING! Laser Hazard. Visible Class 3b laser radiation is
accessible with the panels removed and the interlocks
defeated. Approved safety eye protection must be worn. Eye
protection must be rated for use with the emitted wavelength.
Note: These safety practices are intended to supplement your national
and local health and safety regulations and laws. The information
provided covers instrument-related safety regarding the operation of
the instrument. The information does not cover every safety
procedure that should be practised. Ultimately, you and your
organization are responsible for complying with national and local EHS
(Environment Health and Safety) legal requirements and for
maintaining a safe laboratory environment.
Refer to the most recent editions of the following:
1. Laboratory Biosafety Guidelines, 3rd ed. Public Health Agency of
Canada, 2004.
2. Biosafety in Microbiological and Biomedical Laboratories, 4th ed.
U.S.A. Department of Health and Human Services, 1999.
3. CRC Handbook of Laboratory Safety, ed. K. Furr, 5th ed. Florida:
CRC Press, 2000.
4. National Research Council, Prudent Practices in the Laboratory:
Handling and Disposal of Chemicals, Washington, D.C.: National
Academy Press, 1995.
5. Material Safety Data Sheets (MSDS).
Safety Practices
23