System Reset - Grundig CMS 4200 Manuel De L'utilisateur

DAB OPERATION _____________________________
Scan and store all the available DAB
Full SCAN
radio stations.
Tune to a DAB station manually.
MANUAL
DRC If you are listening to music with
high dynamic range in a noisy
environment, you may wish to
compress the audio dynamic range.
Select DRC HIGH, DRC LOW or
DRC OFF.
SYSTEM Adjust system settings.
4 To select an option, press the OK button to
confirm.
5 To exit the settings, press MENU button.

System Reset

There may be times when you need to reset
your unit back to the factory settings especially
when you have moved house. If you experience
reception problems you may want to reset and
try again. If you move to another part of the
country and pick up the local and national DAB/
FM stations in that area, your previously tuned
channels may no longer be available.
1 When in FM or DAB mode, press the MENU
button and short press the OK button on the
remote control.
2 Press the / button to select SETUP, and
then press the OK button to confirm.
3 Press the /
and then press the OK button to confirm.
4 Press the / button to select RESET, and
then press the OK button to confirm.
5 Press the / button to select Y, and then
press the OK button to confirm.
6 The display will show RESTART, and proceed
system reset. All the stored stations will be
cleared.
button to select SYSTEM,
Software version
This information may be requested when dealing
with technical support issues.
1 When in FM or DAB mode, press the MENU
button and short press the OK button on the
remote control.
2 Press the / button to select SETUP, and
then press the OK button to confirm.
3 Press the / button to select SYSTEM,
and then press the OK button to confirm.
4 Press the /
and then press the OK button to confirm.
button to select SW VER,
ENGLISH 45