Connect The (Fm) Aerial; Important; Connect Power - Grundig CMS 4200 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONNECTIONS ______________________________
Connect to Speakers
Note:
• For optimal sound, use the supplied speakers
only. Connect only speakers with impedance
that is the same or higher than the supplied
speakers. Refer to the Specifications section of
this manual.
1 Loosen the left / right speakers connector.
2 Use the speaker cable (included) to connect
the speaker port on the left/right speaker.
• Golden harness cable connect to the "+"
(red connector) terminal
• Silver harness cable connect to "-"
(black connector) terminal
3 Screw the red (+) / black (-) connector to
secure the cable.
4 Connect the speakers to the SPEAKER OUT
(R/L) sockets on the rear of the main unit.
Connect to Headphone
• Plug a headphone into the
socket. When you connect headphones to hear
the sound from the speakers.
• Please note that the Hearing Safety.
Use the LINE IN/AUX Socket
• Use a RCA to 3.5mm audio cable (included) to
connect the TV's audio output sockets to the
AUX IN or LINE IN socket on the unit.
• Use a RCA to RCA audio cable (not included)
to connect the TV's audio output sockets to the
AUX IN (R/L) socket on the unit.
• Use a 3.5mm to 3.5mm audio cable (not
included) to connect the TV's or external audio
device headphone socket to the LINE IN socket
on the unit.
38 ENGLISH

Connect the (FM) Aerial

• Connect one end of the (FM) aerial (included)
to the ANT. socket at the rear of the unit.
Then position the aerial to obtain optimum
reception.

IMPORTANT:

• You may need to adjust the position of the
aerial when tuning the radio to receive the
strongest signal.
• Never leave the aerial where it can be pulled
by pulled by young children.

Connect Power

Risk of product damage!
• Ensure that the power supply voltage
corresponds to the voltage printed on the
back or the underside of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
• Connect the mains cable to the AC~ socket
of the main unit and then into a mains socket.
(Headphone)

Publicité

Table des Matières
loading

Table des Matières