Parts - ecofort ecoQ 9L steady Mode D'emploi

INSTALLATION
Place the device on a stable flat surface. Remove all packaging materials. Open the air deflector by
using two hand and plug in the power cable. Switch on the device with the POWER button.
Use the HUMIDITY button to set your desired moisture level. We recommend you to let run the unit in
continuous [Co]for the first 24 hrs. In order to save energy, do not open windows or doors while the
unit is running.
To reduce noise levels
Place a piece of carpet or a rubber mat under the unit to reduce any vibrations while the unit is
running. For minimum noise run the unit in Sleep mode.

PARTS

69