Start The Machine; Clean The Machine; Technical Data - GreenWorks GD24RS Manuel Opérateur

NOTE
Make sure that the shoe is tightened.
3.7 REMOVE THE SHOE
Figure 4.
1. Turn the shoe release lever counterclockwise.
2. Pull the shoe from the machine.
3. Turn the shoe release lever to original position.
4 OPERATION
WARNING
Always wear eye protection.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
4.1

START THE MACHINE

Figure 5.
1. Push the lock-out button to the left side to unlock the
switch trigger.
2. Pull the switch trigger.
WARNING
Before you use the machine, wait until the blade gets to
fully speed.
4.2 STOP THE MACHINE
Figure 5.
1. Release the switch trigger.
4.3 OPERATE THE MACHINE
Figure 6 - 9.
1. Hold the machine firmly in front of and clearly away
from the operator.
2. Put the base assembly against the work, then move the
blade into the work.
3. Make sure that the blade is clear of any foreign material
and the material to be cut is held tightly.
4. Small work pieces should be tightly clamped in a vise or
with clamps to the work bench or table.
Do not force. Use only enough push the blade. Excessive
pressure can cause bending or twisting of the blade that may
result in broken blades.
NOTE
English
5 MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
5.1

CLEAN THE MACHINE

The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with a
vacuum cleaner.
• Do not spray the air vent or put the air vent in solvents.
• Clean the housing and the plastic components with a
moist and soft cloth.
6

TECHNICAL DATA

Voltage
No Load Speed
Stroke Length
Weight without battery
Battery model
Charger model
Measured sound pressure
level
Measured sound power level 100.2 dB(A), K
Vibration
The recommended ambient temperature range:
Item
Appliance storage tempera-
ture range
Appliance operation temper-
ature range
5
CAUTION
CAUTION
WARNING
CAUTION
24 V
-1
0-2700 min
28 mm
2.74 kg
G24B2 / G24B4 and other
BAG series
2913907 and other CAG ser-
ies
89.2 dB(A), K = 5 dB(A)
pA
= 5 dB(A)
wA
2
26.14 m/s , K = 1.5 m/s
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
EN
2