Technical Specifications - Velleman VTHD0051 Mode D'emploi

7.3 Carbon Brush
Unplug the rotary tool. Loosen the plastic cover by wrench, remove the old carbon
brush and install a new one into the tool.
8.

Technical Specifications

power supply .................................................................................... 230 V~, 50 Hz
power consumption ...................................................................................... 135 W
speed...................................................... 8 000-30 000 rpm (with speed adjustment)
Use this device with original accessories only. Velleman Group nv cannot be
held responsible in the event of damage or injury resulting from (incorrect)
use of this device. For more info concerning this product and the latest version
of this manual, please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group nv. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior written consent of the
copyright holder.
V. 02 – 08/11/2021
VTHD0051
13 ©Velleman Group nv