Cleaning And Maintenance; Technical Specifications - Velleman VTHD03 Notice D'emploi

• Do not touch the bit during use.
• Do not use the device if the housing is too hot.
• Keep the work area clean.
• Protect this device against rain and moisture.
• Do not wear baggy clothes as the device's moving parts may get caught in them.
• Do not use the device in a dusty environment and near flammable liquids or substances.
• Keep this device out of reach of children.
• The ON/OFF switch must be off when you plug in the device.
• Never use the device without safety goggles.
• Store the device in a cool environment.
• Check the device for damage prior to use and replace damaged parts if necessary.
• Always disconnect the device from the mains when it is not in use or when you wish to clean it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
• Do not crimp the power cord and protect it against damage from sharp edges. Ask an authorised dealer to replace
the cord if necessary.
• All accessories should be tested for at least the speed indicated on the tool label. Accessories that exceed their
rated speed can fly apart and inflict injuries.
5. Operation
Changing an Accessory
• Unplug the VTHD03 from the mains.
• Press down the shaft lock button and loosen the collet.
• Choose a collet for the accessory you want to use. Slide the collet onto the shaft.
• Choose your accessory and insert it into the collet. Turn the collet in a clockwise direction to tighten while
pressing down the shaft lock button.
Placing a polishing wheel
Screw the polishing wheel onto the correct post.
Placing a cutting disc
Screw the cutting disc onto the correct post.

6. Cleaning and Maintenance

• Clean your VTHD03 after each use with a dry cloth. Unplug the drill before cleaning.
• Lubricate the drill every now and then and inspect accessories for damage. If damaged, have them repaired by an
authorized dealer or replaced.

7. Technical Specifications

Rotation Speed
Power Supply
Charging Time
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
VTHD03
10 000 RPM
6VDC / 300mA (power adapter incl.)
5h
4 VELLEMAN