oneConcept Heat Spike Mode D'emploi page 17

• A common cause of overheating is deposits of dust and fluff entering the
heater. Ensure these deposits are removed regularly by unplugging the
heater, allowing it to cool and cleaning as described in the Care, Cleaning
and Storage section.
• Be sure that no other high current appliances are plugged into the same
circuit with your heater as an overload can occur.
• Avoid the use of an extension cord as the extension cord may overheat
and cause a risk of fire.
• Do not use the appliance for other than its intended use.
• Do not use outdoors. FOR INDOOR USE ONLY.
• Do not leave the appliance unattended when switched on.
• Do not place objects on the product or allow objects to obstruct the inlet
or outlet openings, or operate in close proximity to walls or curtains, etc.
Do not cover the unit when in operation.
• Do not locate the heater immediately below a socket-outlet.
• The use of attachments or accessories not recommended or sold by the
product distributor may cause personal or property hazards or injuries.
• This product is intended for normal domestic/household use only.
• Use this heater as described in this manual. Any other uses, not
recommended by the manufacturer, may cause fire, electric shock, or
injury to persons and may void the warranty.
EN
17