Publicité
Les langues disponibles
Les langues disponibles
It really is essential to read and observe the special safety notes included in these operating
instructions and the appendix. If you ever dispose of the model, please be sure to pass on the
complete operating instructions to the new owner.
Introduction
The Graupner HoTT BADGER is a particularly attractive RC trainer which includes
high-quality airborne equipment as standard. No adhesive is required to assemble
the model, since the airframe components such as the fin and tailplane are simply
pushed into slots, where they are held in place by magnets. A further outstanding
point is that the kit includes an alternative pair of sport wings and all the tools
required for assembly. Please take the time to read right through these operating
instructions before attempting to fly the model.
Pack contents
1. Ready-made fuselage with control surface linkages installed, detachable cowl.
Factory-fitted BRUSHLESS CONTROL +T 35 G3,5. No. 33735. GR-12+3xG
HoTT gyro, No. 33576, two DES 488 BB MG 12 mm servos, No. 7919.
2. Fin and rudder with horn attached.
3. Tailplane and elevator with horn attached.
4. Left-hand wing panel with DES 488 BB MG 12 mm aileron servo, No. 7919.
5. Right-hand wing panel with DES 488 BB MG 12 mm aileron servo, No. 7919.
6. 1.5 mm A/F allen key.
7. AT 3511-750 KV BRUSHLESS motor with propeller and spinner.
8. Main undercarriage unit, 1 pair.
9. Noseleg unit
10. Wing joiner
11. Wing fixings
12. Cross-point screwdriver
13. Assembly instructions including safety notes, in German, English and French.
14. LiPo battery, 3/2500 11.1 V, 20C, No. 7633.3
The illustration shows the parts required to complete the standard version. The kit
also includes additional parts required for the Sport version.
GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
2
08/2014
Publicité
