DOTLUX 5274 Mode D'emploi page 16

Restore factory default parameter
- Press both arrow keys simultaneously for 2s until „RES" appears in the display.
- Factory settings: DMX mode on, DMX start address = 1, 4 channel reception,
High PWM output frequency, logarithmic dimming curve, RGB mode running on program 1,
dimmer mode running on program 1, automatic display switch-off is deactivated.
RGB change mode list
P01 Static red
P02 Static green
P03 Static blue
P04 Static yellow
P05 Static cyan
P06 Static purple
P07 Static white
P08 RGB jump
P09 7 color jump
P10 Red strobe
Linear dimming curve
brightness brightness
P11 Green strobe
P12 Blue strobe
P13 White strobe
P14 RGB strobe
P15 7 color strobe
P16 Red fade in and out
P17 Green fade in and out
P18 Blue fade in and out
P19 White fade in and out
P20 RGBW fade in and out
P21 Red yellow smooth
P22 Green cyan smooth
P23 Blue purple smooth
P24 Blue white smooth
P25 RGB+W smooth
P26 RGBW smooth
P27 RGBY smooth
P28 Yellow cyan purple smooth
P29 RGB smooth
P30 6 color smooth
Logarithmic dimming curve
brightness brightness
16