DOTLUX 5274 Mode D'emploi page 15

Stand-alone RGB/RGBW mode
- Enter stand-alone RGB/RGBW mode only when DMX signal is disconnected or lost.
- Short press M key, when display P01~P30, enter stand-alone RGB/RGBW mode.
- Press or key to change dynamic mode number(P01~P30).
- Each mode can adjust speed and brightness.
Long press M key for 2s, prepare for setup mode speed,
brightness, W channel brightness.
Short press M key to switch three item.
Press or key to setup value of each item.
Mode speed: 1-10 level speed(S-1, S-9, S-F).
Mode brightness: 1-10 level brightness(b-1, b-9, b-F).
W channel brightness: 0-255 level brightness(400-4FF).
Long press M key for 2s, or timeout 10s, quit setting.
Stand-alone RGB/
RGBW mode
(P01-P30)
Stand-alone dimmer mode
-
Enter stand-alone dimmer mode only when DMX signal is disconnected or lost.
- Short press M key, when display L-1~L-8, enter stand-alone dimmer mode.
- Use the arrow keys to change the dimmer modes (1-8).
- Each dimmer mode can adjust each channel brightness independently.
Long press M key for 2s, prepare for setup four channel brightness.
Short press M key to switch four channel(100~1FF, 200~2FF, 300~3FF, 400~4FF).
Press or key to setup brightness value of each channel.
- Long press M key for 2s, or timeout 10s, quit setting.
Stand-alone dimmer
mode
Speed
(8 level) (10 level, 100 %)
15
Brightness