Cafe CDT706 Serie Manuel Du Propriétaire page 15

Loading
A loaded upper rack may be
CAUTION
heavier than anticipated. To prevent
minor injury or damage to the contents, do not raise
or lower the upper rack after the rack is loaded.
The upper rack allows 2" of adjustment up or down to
accommodate large items. The upper rack may be lowered
by pushing the long flaps on each side of the rack. This will
allow you to lower the rack (see fig. Upper Rack). To raise
the rack, lift up on the rack until the rack locks in place.
To add flexibility in loading, the stem safe shelf (on some
models) may be placed in the up or down position or
unfolded and placed in the lower unfolded position.
The shelf may also be used to secure stemware such as
wine glasses. Because these stemware items come in
various sizes, slowly push the rack in to ensure the items
do not bump into the edges of the dishwasher, which
may cause damage to the items.
The fold down tines (on some models) provide flexibility
for extra-large and hard-to-fit items. The tine rows can be
adjusted to a vertical or lay-down position.
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware
baskets may vary from your model.
8 Place Settings - Upper Rack
Models - CDT706, CDT800, CDT805, CDT845,
CDT855, CDT866 and CDT875 Series
14
Upper Rack
Place the
slots in the
utility shelf
clips over
the vertical
rack wires
and push
down to attach
utility shelf
onto second
wire of rack
Model - CDT836 Series
49-4000042 Rev 4