Kobalt SGY-AIR160NB Mode D'emploi page 15

OPERATING INSTRUCTIONS
The paint sprayer will not properly spray
unless the fan direction is either horizontal
or vertical.
1. Adjust the direction of fan to be either
horizontal or vertical as required by
loosening the air cap ring (D1/D2) 90
degrees. Hand tighten the air cap
ring (E1/E2) after adjustment
(See Figure 1).
NOTE During normal use, the air cap
(D1 /D2) is adjusted to be horizontal. This
provides a vertical fan-shaped pattern
which gives maximum and even material
coverage as the gun is moved back and
forth parallel to the surface being finished.
2. Set pattern size for desired shape. For full
pattern, open spray pattern adjustment
knob (F1/F2) counterclockwise. For a
round pattern, turn spray pattern
adjustment knob (F1/F2) clockwise
(See Figure 2).
3. Turn the fluid adjustment knob (G1/G2)
fully clockwise until closed (See Figure 3).
WARNING
1
Air Cap
Air Cap Ring
2
3
15
Horizontal Fan
Vertical Fan
F2
F1
G1
G2