Care And Maintenance - Axkid Kidzone Mode D'emploi

Care and Maintenance

The seat cover can be removed and washed in a washing machine at 30º C on the
"Gentle Cycle" programme. Do not put the cover in a dryer as this can damage the cover
and the padding may separate from the fabric.
Visit www.axkid.com to find videos explaining how to remove and attach the cover.
Any plastic parts of Kidzone can be cleaned with mild detergent and water. Do not use
aggressive chemicals containing solvents etc, as this can cause damage to the plastic
and compromise the safety of the child restraint.
All materials used in the Kidzone child restraint are recyclable and should be recycled as
per your local legislation. Ask your local recycling centre for advice when recycling this
product.
Do not make any modifications or alterations to the Kidzone child restraint other than
those described in this instruction manual. Follow the instructions in this manual carefully.
Any repairs must be carried out by the manufacturer or agent.
If the seat cover needs replacing ensure only original products from Axon Kids are used.
If other products are used the Kidzone' s safety system may be compromised and could
lead to severe injury or death in case of an accident.
All materials used have a very high UV-resistance rating. However, UV-light is very
aggressive and will ultimately lead to fading of the seat cover. This is not covered by our
warranty as it is considered normal wear and tear.
Warranty
The Kidzone child restraint is covered by a 24 month warranty from date of purchase.
Ensure you save your receipt and bring it to your place of purchase should you have any
warranty issues. The warranty does not cover:
* Normal wear and tear
* Damage due to incorrect use, neglect or accident
* If repairs have been carried out by a third party
11