Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation at time of framing
1. On the top of the appliance's case in front of the
stand-offs, remove the positioning brackets (2
screws each).
2. Install the lower panel using the three studs at the
base of the appliance (3 nuts).
3. On the appliance, install the side panels as indicated
(3 screws per side).
On top, each side of the
window, remove the
convection brackets (1
nut/side); they are not
used with this kit.
4. Install the upper panel as indicated (2 screws).
5. Slide the appliance into the framing and fix it to the
studs on each side (6 fixing points per side).
6. Set aside the side doors, removable panel and
barrier screen to install later when the appliance's
set-up and wall finish application are completed.
Continue the installation of the heater as indicated
the manual supplied with the heater.
3
Publicité
Table des Matières
