Operating Your Appliance; Temperature Setting - Avanti COR30W3S Manuel D'instructions

OPERATING YOUR APPLIANCE

It is recommended you install the appliance in a place where the ambient
temperature is between 72- 78 degrees Fahrenheit. If the ambient temperature is
above or below recommended temperatures, the performance of the unit may be
affected. For example, placing your unit in extreme cold or hot conditions may
cause interior temperatures to fluctuate. The range of 34 - 50 degrees Fahrenheit
may not be reached.
ON/OFF POWER
- Press and hold for 2 seconds on control panel to turn on or turn off the cooler, when cooler
is turned off, the appliance will stop working.
LIGHT SETTING
- There are two light modes, press and hold for 3 seconds to select light mode.
1. Light on and off mode: The default setting of light will be controlled by sensor and LCD screen will
show , when door is opened, the light will turn on automatically, when door is closed the light will
be turned off.
2. Light on model: Press and hold for 3 seconds to enter light on mode, when in this mode,
LCD screen will display

TEMPERATURE SETTING

- Press or
Will alter the temperature by 1°F。
- Press and
Celsius to Fahrenheit
and light will always be on.
to adjust the temperature of the appliance, and each press on the button
together and hold for 3 seconds to change temperature display from
11
°C/°F