Operating Your Appliance - Avanti FF4D15H3S Manuel D'instructions


Temperature Control Panels
Refrigerator Temperature Control

Setting the Temperature Control
•
Your refrigerator has one control for regulating the temperature. The temperature control is located
on the outside of the refrigerator compartment door.
•
The first time you turn the unit on, the unit will start at the default temperature set at the factory, 38ºF
in the refrigerator section and -08ºF in the freezer section.
•
The first time you turn the unit on, adjust the temperature in the refrigerator compartment to 34ºF
and run for at least 4 hours before placing foods inside. This will ensure the freezer cabinet is
thoroughly chilled and the refrigerator compartment will be stabilized before food is placed. Then
adjust the temperature setting to your desired setting that best suits your needs.
To adjust the temperature in each zone, press the Temp Zone button, the selected zone will flash
on and off.
Press the Temp button to select the desired temperature and then press the OK button to activate
the setting. (Temperature will cycle in 1ºF increments with each press of the button).
Refrigerator temperature range: OFF – 43ºF
Freezer temperature range: -8 – 3ºF

OPERATING YOUR APPLIANCE

9