Electrical Installation - Truma AquaGo Serie Mode D'emploi

Connection cable
Heating cartridge
Top
O-rings
Latch
Connector X1
Fig. 4b
8
8. Risk of a short circuit!
• Lay the connection cable upward so that
it is not jammed when the Easy Drain
Lever is closed.
9. Install the heating cartridge as shown in
Fig. 4b. Observe the correct installation
position and close the Easy Drain Lever
until it is locked by the latch. You can hear
a "clicking" sound as the Easy Drain Lever
engages.

Electrical installation

("adapter cable")
1. Damage to the contact sockets
resulting from incorrect installation.
• During installation, you must align the
contact sockets as shown in Figure 5.
• Remove the socket housing from the con-
trol unit (press the lock).