Technical Data; Installation Instructions - Franke PEAK PULL DOWN FFPD5550 Manuel D'installation

EN

Technical data

Operating data
Operating pressure (ideal)
Operating pressure (max.)*
Operating pressure (min.)*
Water temperature (ideal)
Water temperature (max.)
Hole Size For Faucet
Certifies this faucet complies with ASME A112.18.1 / CSA B125.1 & NSF 61, NSF 372 and
AB1953. The faucet also complies with water usage requirements of the California
Energy Comission and the US Department of Energy.

INSTALLATION INSTRUCTIONS

1. Remove all contents from the package
and check for completeness.
2. Turn off water supply.
3. Cut a mounting hole 1 3/8" diameter
(35mm) in the desired mounting surface
(if one isn't available).
4. Ensure Base O-ring (2) is in place in the
Faucet Base (1) (fig. 2A).
2A
1
2
Value
60 PSI 4 bar 400 kPa
115 PSI 8 bar 800 kPa
30 PSI 2 bar 200 kPa
140°F 60°C
158°F 70°C
1 3/8 " 35mm
5. Insert the faucet into the hole, hoses
first (fig. 2B)
2B
4
5
6
7
– 4 –