Switch The Call Between The Phone And Headset; Use The Headset With Several Phones; Clear The Settings - Nokia BH-300 Mode D'emploi

B a s i c u s e

■ Switch the call between the phone and headset

To switch the call between the headset and a compatible Nokia phone,
press and hold the answer/end key, or use the respective function in
your phone.

■ Use the headset with several phones

You can pair the headset with up to eight phones but connect it to
only one phone at a time.
The phone that was first paired with the headset is the default phone.
If the headset is switched on within 10 meters (30 feet) of several paired
phones, the headset tries to connect to the default phone.
If the headset cannot connect to the default phone, the headset tries
to connect to the last used phone. If the headset cannot connect to this
phone either, one of the other six paired phones can be connected to
the headset. To make the connection, see the user guide of your phone.

■ Clear the settings

If you want to clear all the settings from the headset (for example, the list
of paired devices if you cannot pair the headset with your phone), press
and hold the power key and the answer/end key over 10 seconds. After
the settings are cleared, the headset beeps twice, and the red and green
indicator lights alternate for several seconds.
13