Removing And Replacing The Storage Drawer - Samsung NX58 4311S Serie Manuel D'utilisation

Maintaining your appliance
Hinge
lock
54 English
NX58R4311SS_AA_DG68-01151A-00_EN.indd 54
2. Firmly grasp both sides of the door.
3. While supporting the oven door,
insert both door hinge arms into the
slots in the bottom sides of the door
frame. When the door is held at about
5 degrees, the hinge arms will slide in
and down.
4. Completely open the oven door. If the
door will not fully open, the hinge arms
are not correctly inserted into the slots
in the bottom of the door.
5. Lock both hinge locks. Push each lock
up against the front frame of the oven
cavity.
6. Close the door.
7. Reconnect power to the range.

Removing and replacing the storage drawer

To remove the storage drawer
1. Pull out the drawer and remove any
2. While supporting the drawer, pull it out
3. Clean the drawer in warm, soapy water.
stored content.
until the top of the drawer sides come
out of the two nylon drawer guides.
Then, lift to remove the drawer.
Rinse and dry thoroughly.
1/25/2019 11:18:42 AM