Safety Advice; Technical Data - Resol HE-Check Manuel

1

Safety advice

Do not use the device if it is visibly damaged!
ATTENTION! Damage by high voltage!
Measuring voltages higher than 18 V can
lead to damage to the device.
Î Do not measure voltages higher than
18 V!
Note:
The device must only be used in dry interior
locations.
Note:
Use original accessories (measurement cables,
adapters, etc.) only.
12
2

Technical data

Inputs: PWM / 0-10 V
Outputs: PWM / 0-10 V
PWM frequency: 40 ... 2000 Hz
Measuring range: 0 ... 15 V
Power supply: 3 AAA batteries, included with the device,
typical battery life: 2 years
Functions: measuring and generating a PWM and 0-10 V
signal
Housing: plastic, ABS and TPE
Indication / Display: full graphic display
Operation: 6 push buttons at the front of the housing
Protection type: IP 54 / DIN EN 60529
Safety: 18 V class I / EN 61010
Ambient temperature: 0 ... 40 °C
Degree of pollution: 2
Dimensions: 120 x 65 x 27 mm
HE-Check
Made in Germany
18 V CAT I
SN
-
+
3 AAA IEC LR03