Resol HE-Check Manuel page 11

Target group
Only qualified electricians should carry out electrical
works.
Instructions
Attention must be paid to the valid local standards, regula-
tions and directives!
Information about the product
Proper usage
With the HE-Check, the function of the pump and the sig-
nals of the controller can be checked quickly and easily in
compliance with the technical data specified in this manual.
Improper use excludes all liability claims.
CE Declaration of conformity
The product complies with the relevant directives
and is therefore labelled with the CE mark. The
Declaration of Conformity is available on request,
please contact the manufacturer.
Disposal
• Dispose of the packaging in an environmentally sound
manner.
• Batteries and rechargeable batteries contain toxic sub-
stances and must not be disposed of in regular house-
hold waste.
• At the end of its working life, the product must not be
disposed of as urban waste. Old appliances must be dis-
posed of by an authorised body in an environmentally
sound manner. Upon request we will take back your old
appliances bought from us and guarantee an environ-
mentally sound disposal of the devices.
Overview
The HE-Check testing device is used for generating and
measuring PWM or 0-10 V signals. This way, high-efficiency
pump functions as well as the controller signals can be
tested quickly and easily.
For testing bidirectional pumps, PWM signals can also be
generated and measured simultaneously.
• Intuitive operating concept
• Ergonomic design
• Easy fault diagnostics
• Including different measuring cables
11