Kobalt SGY-AIR226 Mode D'emploi page 6

SAFETY INFORMATION
WARNING
RISK OF PERSONAL INJURY
WHAT COULD HAPPEN
A tool left unattended or with the air
hose attached can be activated by
unauthorized persons leading to their
injury or injury to others.
Air tools can propel fasteners or
other materials throughout the work
area.
Always make sure to remove the
Allen wrench before operating. A
Allen wrench that is left attached to a
rotating part of the tool increases the
risk of personal injury.
Air tools can become activated by
accident during maintenance or tool
changes.
Air tools can cause the workpiece to
move upon contact, leading to injury.
Loss of control of the tool can lead to
injury to self or others in the work
area.
HOW TO PREVENT IT
Remove air hose when tool is not in
use and store tool in secure location
away from reach of children and
untrained users.
Use only parts, fasteners and
accessories recommended by the
manufacturer.
Keep work area clean and free of
clutter.
Do not allow children to operate tool,
and keep children away from the
work area.
Keep work area well lit.
Remove Allen wrench before turning
the tool on.
Remove air hose to lubricate.
Never carry the tool by the air hose.
Avoid unintentional starting.
Only an authorized service
representative should service the
tool.
Use clamps or other devices to
prevent movement.
Before changing accessories,
making repairs, or when tool is not in
use, shut off air supply and
release/drain air pressure from hose.
Disconnect tool from air supply or
hose and store in a safe location.
Never use the tool while using drugs
or alcohol.
6