Bt Operation; Aux-In Operation; Line-In Operation - auna Bazzter Mode D'emploi

BT OPERATION

1. Press the FUNCTION button on unit to switch to BT function, the LCD
will display "bt" and the pair indicator will flash at high speed.
2. Turn on the BT function on the device, scan the unit "Bazzter" and
connect, then input the password „0000" if required, the pair indicator
keep light up to indicate connection done, and the display will show
"bt". Press Play to start playback.
3. Rotate the VOLUME knob on the unit or adjust the volume on the
external device to increase or decrease the music volume to your
desired level.
4. Press and hold the PLAY/PAUSE/PAIR/SCAN button to disconnect BT.
Note: The BT works best within 10 meters in open air.

AUX-IN OPERATION

1. Press the FUNCTION button on unit to select the "AUX" mode.
2. Connect your audio device to the AUX IN jack on the top panel of the
unit with an AUX IN cable.(audio cable is not included)
3. Rotate the VOLUME knob on the unit or adjust the volume on the
external device to increase or decrease the music volume to your
desired level.
4. Control the playback with your audio device.

LINE-IN OPERATION

1. Press the FUNCTION button on unit to select the "LINE" mode.
2. Connect your audio device to the RCA jack L/R on the back panel of the
unit with RCA cable (cable is not included).
3. Rotate the VOLUME knob on the unit or adjust the volume on the
external device to increase or decrease the music volume to your
desired level.
4. Control the playback with your audio device.
EN
21