Usb Operation - auna Bazzter Mode D'emploi

USB OPERATION

This unit provides one USB port for music playback.
1. Press the FUNCTION button on unit to select USB mode.
2. Plug the USB memory stick to the USB port on top of the unit. Playback
will start automatically from Track 1.
3. To pause playback, press the PLAY/PAUSE/PAIR/SCAN button on unit.
The playing time will flash on the display.
4. To resume playback, press the PLAY/PAUSE/PAIR/SCAN button again.
5. To select a desired track, press the TUN.+/
respectively during playing until the desired track appears on the
display. The unit will start play automatically.
6. To search for a particular passage during playback, press and hold the
TUN.+/ or
at high speed until desired point (passage) appears, then release the
button for normal playback mode.
7. To select a song which track number exceeds 10, press the 10/MEM./
FOLD.+ or 10/MEM./FOLD.- button each time to skip forward/backward
10 tracks, then press the TUN.+/
desired track.
8. To select a desired folder (if the USB contains more than one folder),
press and hold the 10/MEM./FOLD.+ or 10/MEM./FOLD.- button each
time to skip forward/backward a folder, then press the TUN.+/
/TUN.- button to select desired track.
Note: The USB port is intended for data transfer only, other devices
cannot be used with this USB connection. The use of USB extension
cords is not recommended. Don't plug the USB from the unit when
playing or reading the USB device.
/TUN.- button to scan the current playing track
or
or /TUN.- button
/TUN.- button to select
or
EN
19