Design And Function; Complete Overview - CASO DESIGN MG 20 Ecostyle Ceramic Mode D'emploi


The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fire that is involved with this.

Make sure that the power cable is undamaged and has not been installed under the
oven or over hot or sharp surfaces.

The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician. The manufacturer cannot be made responsible
for damages that are caused by a missing or damaged protective conductor.

14 Design and Function

This chapter provides you with important safety notices on the design and function of the
device.

14.1 Complete overview

(1) Protective door latch
(4) Oven ventilation opening (Do not remove film!) (5) Operating panel / control knob
► The CERAMIC base plate can be hot following the cooking time. Do not touch the
CERAMIC base plate!
► The ventilator can continue running afterwards to cool down the device.
► Always turn the control knob Time to 0, when you do not use the device.
► Do not use the device, when it is empty. It could be damaged.
(2) Oven window
ATTENTION
PLEASE NOTE
(3) Metal rack
49