Changing The Battery - Facom 711P.500 Notice D'instructions

Measuring alternating current
For example : Current consumption of electrical appliances (industrial motors,
radiators, dishwashers etc.)
Measuring direct current
For example : Alternator output, current consumption of a starter, pre-heating
plugs, accessories etc.

Changing the battery

Slide the button on the ammeter clip to OFF. On the back of the unit, slacken
the captive screw, take the lid off and replace the 9 volt battery
(6LR61 or 6LF22 or
. Put the lid back on before using your clip again.
NEDA 1604)
7