Braun SlideScan 6000 Mode D'emploi page 9

d. single slide scanning
load the empty magazine into the tunnel First until it touches the slide
•
transport arm completely. slide the magazine forward to be sure that the
transport arm is in the first slot of the magazine.
Press the eject button [i] to make the slide holder open exposing the loaded
•
slide.
Place the slide as illustrated [i] into the slide holder and press the slide holder
•
down [ii].
open the CyberView X 5.0 driver program to scan the slide.
•
Attention!
When using the single slide scanning function, please check the slide transport arm
has been moved completely into the unit and the cover for magazine tunnel is taken off.
i.
Eject
Button
16
ii.
Slide
Holder
17