Braun SlideScan 6000 Mode D'emploi page 18

2. advanced setting
2-1. "auto exposure" - apply auto exposure adjustment to all of the
scanned films.
2-2. "auto Balance" - apply auto Gamma adjustment to all of the
scanned films.
2-3. "auto Contrast" - apply auto Contrast adjustment to all of the
scanned films.
2-4. "digital noise reduction" – apply digital noise reduction filter to
all scanned films.
3. default scanning area
adjust the scanning size as well as adjust the "scan offset" setting to
move the image position of slide.
34
4. magic touch / auto Color
4-1. enable / disable magic touch and auto Color adjustment to scans.
Magic Touch is a powerful dust and scratch removal technology that does
away with the hassle of learning complex and tedious software tech-
niques. Being hardware-based, it works seamlessly with the scanning
process to ensure the best possible results when bringing images into
the computer. dust, scratches and other flaws are intelligently detected
and eliminated, restoring the image to its original beauty.
scanning with magic touch requires longer scanning times, the feature is
turned off by default.
Auto Color takes the guesswork out of the scanning process
to streamline the workflow and achieve the best results. Proprietary
color enhancement technology is applied to scanned images to
provide the most accurate color adjustment, resulting in vibrant
images with optimal brightness, contrast and saturation.
to access these features, click on scan > (selected film type) Preference > magic
touch/auto Color. Place a check in the box of the feature to enable magic touch/
auto Color.
e. exit
Closes theCyberView X 5.0 user interface.
there is a message pop-up "Would you like to apply current scan resolution
to default?" click "Yes" to save , "no" to discard the current setting or "Cancel"
to return to Cyber View X.
35