Functional Description - Makita GV5010 Manuel D'instruction

FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
► 1. Lock button 2. Switch trigger
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
• Switch can be locked in "ON" position for ease
of operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing side grip (auxiliary handle)
1
► 1. Side grip
CAUTION:
• Always be sure that the side grip is installed
securely before operation.
2
Screw the side grip on the tool securely.
Installing or removing abrasive disc
► 1. Hex wrench 2. Clamp screw 3. Countersunk
washer 4. Abrasive disc 5. Plastic pad 6. Spindle
Mount the pad onto the spindle. Fit the abrasive disc
and countersunk washer on the pad and screw the
clamp screw clockwise into the spindle.
To tighten the clamp screw, grip the edge of the pad
with your hand, then tighten the screw clockwise with a
hex wrench securely.
1
2
► 1. Hex wrench 2. Abrasive disc
5 ENGLISH
1
1
2
3
4
5
6