Control Panel - Klarstein DRYFY CONNECT Serie Mode D'emploi

EN
24

CONTROL PANEL

1 Timer
24-hour timer setting. Press this button to set the time to turn the dehumidifier
on/off. The setting range is 1 - 24 hours. If you want to cancel the timer setting,
press the button twice after confirming the set time.
2 Dry key
When you press this button, the inside of the dehumidifier is dried. This prevents
the formation of mould. The entire drying process takes approximately one
hour. Press this button again to cancel the drying function and return to the
operating status.
3 Air velocity
In the AUTO or CONTINUOUS settings, you can select between high (HIGH)
and low (LOW) air speed.
4 LCD display
In the AUTO, CONTINUOUS and DRYING modes, this display shows the
ambient humidity. When humidity is set in Auto mode, this display shows the set
humidity and shows the set time in Timer status. „%" indicates the percentage
of humidity.
5 Humidity Setting
• As soon as you press this button, the humidity in the range 30 % - 35
% - 40 % - 45 % - 50 % - 55 % - 60 % - 65 % - 70 % - 75 % - 80 % is
displayed circulatingly. The humidity setting is for Auto mode only.
• Item 10034434 & 10034435: Press this button for about 3 seconds to
turn the pump on/off.