Klarstein DRYFY CONNECT Serie Mode D'emploi page 29

Note: The drain line should not be too long (a length of less than 60 cm is
recommended). The end of the drain line should be in a lower position than the water
outlet (at least 10 cm lower), otherwise there is a risk of leakage.
When the pump function is activated:
Before the start
Filter frame
• Before switching on the appliance,
remove the filter frame and insert the
activated carbon filter (clean and dry
the filter and filter frame regularly).
• Do not turn on the unit until the filter
frame and filter have been inserted
correctly.
Determine the position of the drain
plug and remove it. Connect a drain
pipe with a diameter of 5 mm.
Note: Connect the drain line before
activating the pump function to prevent
the floor from getting wet.
Active carbon filter
EN
29